here ya go


http://www.youtube.com/watch?v=oM5cqJbXuZk

what a pile of crap that car is!!! i could not wait for the movie to end i think my big wheel is faster then that thing is, shit...... JP

HaHa..at least my car has a motor in it. and hey..it wasnt bad for(problems I fixed today) :bad maf, 1 BURNNNNED plug wire,and my bank2 sensor 1(pass. o2 sensor) had no activity..i Hit a speed bump and broke 3 wires on the o2. Fixed em now. oh..btw..thats on a stock HORRIBLY slipping clutch.

broken in? BAh no such thing IMO... always "broke in" the race motors ont he engine dyno by doing pulls... lol

car sounds good, we owe eqachother another race - i wanna race you with my shit running right instead of on the 270 rwhp "tune" *fucking carb*

same motor set up on your car?? Yeah well once I get everything fixed it should run nice. Yeah not broken in..the car goes to 6800RPMS redline is set to 7100. Hopefully it wont be too slow this year. Im just lookin to have fun this year.

Word on the street is that a mustang with some spray walked all over you the other night?!?!?!!?

i did not hear that one but i did see on scriveners site that the race last week with the kid witht he red ls1 got walked on by the nova but they made a vid that says the camaro won. all i know is all those ls1 ta/ camaro guys look for some kind of way to take there way out of a lose.

http://www.scrivenerperformance.com/forum/...p?p=14089#14089

well "truth" in the street is that that mustang with the 100 shot/cams/full suspension/this and that..got walked by 6 cars...(at the 100mph mark) and was steadily fading away before he hit the brakes. There were about 4 races..all 4 had the same turnout..he wouldnt go past 110mph...

let me add..my car isnt fast..its just supposed to be to have fun..and..surprise any unsuspecting Z06's or Cobras on the highway..when they expect to piss all over my lil LT4(to them LT1)

I was just bustin balls.

i know...but by the time the story gets passed around..ill have been beaten by a 6 cylinder mustang with a fat girl driving..or something stupid. LoL...My clutch should be done tomorrow..cant wait to actually be able to get on it. Ill make a much better video.

well i heard u jumpped out on the mustang on the 2nd beep??? isnt that cheating? haha chris said if u raced for real he will go by u so fast he will have enough time to pull over and shut the bottle off before u even finish

KISS THE ASS BABY!!! haha

HaHaHa..he knows better than to say that..besides..I picked out everything he has in that car...the only thing he did was ..swipe his card..thats about. and there was no jumping out. Honestly..from a stop..hed beat me...till I stopped spinning..I was pulling away very steadily..but he wouldnt go over 110mph.

yea thats ok we are all joking we know ur big block is faster

heh, i wish it was a big block..or even fast..i KNOW if him and I raced from a stop hed embarass me...i got beat(off the line) by a stock convertable mustang...he pulled me by about 5 cars...my car is useless at a stoplight...I need sticky tires. Just put my clutch in today and its even worse...tires wont hold worth a shit. I need suspension and tires....well I neeed money first...

Yeah that car is skating all over....What gears you running?

ya know something? FUCK MY CAR!. after the clutch instal..its vibrating like crazy. I think the idiots who did the flywheel balanced it wrong. Fuck this pile of shit.

?


dude, anger issues lol... could be as simple as a wheel weight ya know

One could only hepe...and it only takes about an hour to change a flywheel so its not too bad if thats the cause...

oh??? lol gotta pull the trans... t56's arent small dude lol

K so hour and 10mins?

yeah well..getting the flywheel is going to be the problem. Fuck this bullshit. Im not sure how much damage I did to my motor by driving it. And I have to drive it to the shop tomorrow to take it back a-fuckin-part.

Aftermarket flywheel?

no stock resurfaced.

why do you think the flywheel is the problem though???

and you didn't damage the motor... after a 30 min break in on the dyno with my motor we had it doing pulls from 4500 on up in succession... if you hurt the motor, i would consider having someone else fix it...

the pressure plate was out of balance by 2 ounces(almost 60 grams) in the worst spot. So its getting balanced..and that should fix the problem(i hope)

ya they arent small, but dave knows that he help me put mine in.

The t5 we could have out and back in, with in an hour

oh i pulled it already today..took me 35 min to get it out the second time around. It is a pain in the balls...but ill have everything back together tomorrow morning.

And thats why we should never MF our cars until we know what's wrong for sure...But they are out whores and deserve physical and emotional abuse....Just like any good woman needs...

LOL well i dunno bout the physical abuse part but emotional and verbal anyways....


good to hear it was as simple as that - what clutch was it the stocker? why the hell would it be out so bad?

no the new clutch..the PP was out of wack..i think its fixed..still vibrates..but im guessing its cuz of the open Y pipe.

Maybe wack it another way?

well an exhuast would probably help lol

an exhaust, cai,tb, maf,opti-shit, and ignition mod. would prolly help.

What do you need to finish your exhaust...it has a muffler on it so whats the wait?

a pipe to connect it to the Ypipe..lol..jaime is going to do it this week if theres time.

You get that done yet?

no. IM just gonna put an SLP loud mouth on it...so its going to be even louder. But not on the inside. Im gonna try something a lil different too..im gonnasee if he will put a 3 bolt flange on the rear section of both exhausts..so they can be changed quickly. I know it sounds stupid but..i gotta make my neighbors happy..figure i can just put the stock muffler/tailpipes on the car on the weekdays then weekends when im never home stick the slp on

That or a nice exhaust clamps...The metal band ones not the u bolt...

yeah i have those on the headers..well i put the slp on tonight OMG ITS BEAUTIFUL ON THE INSIDE so smooth...so quiet..on the outside it sounds like f'n war... when i stood behind it and my friend reved it to about 5k i can honestly say it hurt my ears to the point where i had to cover them....felt like the feeling you get when you have a bad ear infection.

thats awesome dude - i'mnot that much of a fan of the slp sound, but i've never heard it on a modded up lt1 before either

What about an LT4? BTW wtf is the difference?

LT4 ='s LT1 with taller port heads, better flowing intake, bigger cam stock for stock... supposedly the exhuast manifolds were better to. Either way it makes not difference, the LT4 heads were nothing to brag about, even ported...

LT4 is RED if i recall

HUH?

Red intake..you can tell the difference from the Intake. Also...LT4 heads ported flow notically better than LT1 ported heads...2.05/160 for LT1 and 2.08/160 for and they get about 10-15 more CFM than an LT1 head...AFR makes some nice LT4 heads though.

Did you check the U-joints. If ones all beat up it could cause a nasty vibration. Not to mention their cheap and easy to install if their bad.

I would hope he checked that....If not then thats where my money is...